Fixing Samsung Ice Maker

Fixing Samsung Ice Maker with this guide which provides step-by-step advice for solving problems or issues about our Samsung product.

We are in our way of fixing samsung ice maker. What to do when the refrigerator has problems with ice.
Please choose one of the following options describing the problem.

First common problem when fixing samsung ice maker - No waiver ice

Connect the water line to the water supply valve of the refrigerator for dispensing water. 2. Push the drawer back fully to the guide ice ice maker does not touch the back of the drawer. (If the back of the drawer guide touches the ice maker, this will not make more ice due to a signal full ice.) 3. It takes about six hours for initial ice making, threw 2-3 times these ices to ensure clean water is dispensed.

If ice is not dispensed through the door, please check the following steps.

Step 1) Check if "No Ice" is selected (for some models)

Although not select ice, ice cubes are dispensed stored in the drawer.

Step 2) Check for ice cubes in the ice drawer.

Make sure there is ice in the bucket. If there is no ice in the ice bucket, only make noise when the dispenser lever is pressed.

Step 3 in fixing samsung ice maker) Check the ice drawer is fully seated.

Check the ice drawer is fully seated. If the ice drawer is not fully seated, when the dispenser lever is pressed hear the engine run, but not dispense ice. Remove the drawer, and then reinsert it.

Step 4) Check the wiring connection.

If your refrigerator was installed and were dismantled doors to enter the house, make sure the wiring harness is connected either at the top of the door. For more information, please refer to the user manual.

Step 5) Check the type of ice and function in the panel.

Make sure the figure is selected either cubed or crushed in the indicator panel.

Step 6) Check the ROTOR TYPE MOTOR WITH ENDLESS this working.

When the lever is pressed ice must have operating sound and flap opens ice. At this point it could be that you have done fixing samsung ice maker.

Another problem when fixing samsung ice maker - Too much ice

If your ice maker is producing too much ice, the ice level arm is not working properly.

To check the ice arm, remove the ice drawer, and then move the arm. If the arm does not move easily, your refrigerator needs service.

No Ice comes out from de samsung ice maker

If the water line is not connected properly, the ice maker will not produce ice. The refrigerator ice starts to maximum 24 hours after be operating.

As do when no ice. See the next two different cases and proceed carefully.

If your refrigerator was installed.

Step 1) Check the water supply valve and connection.
Step 2) Make sure to clean the air of the whole system. Air purifying system, dispense approximately 1 liter of water from the water dispenser in front of the refrigerator.
Newly installed refrigerators require up to 24 hours to cool and to begin producing ice.

If your refrigerator is not freshly installed.

Step 1) If your refrigerator has a water dispenser, check the flow of water from the dispenser. If the water flow is slow or weak replace the water filter, regardless of the age of the filter.
Step 2) Make sure the ice maker is activated by selecting cubes or crushed.
Step 3) Make sure the refrigerator doors are properly closed.
Step 4) Restart the ice maker by pressing the reset button. After restarting the ice maker, wait 24 hours and see if the ice production started. If you still have problems fixing samsung ice maker then read the rest of the guide.

Bad Taste / Smell ice

The water should be sufficiently removed in the initial installation. 2. If the water connection is bad, possibly contaminating water line.

Follow the specific instructions, as the case you should.

In case of initial installation

Bad taste / smell of water is more commonly experienced with the first liters of water cooler dispenses. Samsung recommends dispensing 2-3 liters of water (total amount of water tank) after initially the water line system is emptied.

It is recommended to clean the ice drawer before using the ice and not use ice for 1 or 2 days and empty the ice drawer once the total capacity of the drawer occurs.

In case of contamination of the water flow path.

When you install the water connection, do not forget to install the water filter before dispensing water. If water is dispensed without the installed water filter, water hose and tank become contaminated. And once it is polluted, it is difficult to clean.

In case of contamination of the filter.

If your refrigerator is not new, and you experience an odor in ice or water, replace the filter. The filter can not be clogged, but may be contaminated with excess impurities. Then install the new filter, clean the dispensing system with 2-3 liters of water.

If you need to drink purified water, you can connect directly to a water purifier in the back of the fridge.
It is recommended to use a water filter supplied by Samsung. (This is also available in any store appliances).

Low ice production

If your refrigerator does not produce enough ice, please follow the following steps depending on the case needed in order to reach your goal wich is fixing samsung ice maker

If your refrigerator is newly installed.

Step 1) Check the water supply valve and connection.
Step 2) Make sure all air purifying system. Air purifying system dispense approximately 1 liter of water from the water dispenser on the front of the refrigerator.
Newly installed refrigerators require up to 24 hours to cool and to begin producing ice.

If your refrigerator is not freshly installed fixing samsung ice maker is a bit different.

Step 1) If your refrigerator has water dispenser, check the flow of water from the dispenser. If the water flow is very slow or weak, replace the water filter, regardless of the age of the filter.
Step 2) Check that the ice maker is turned on by selecting cubes or crushed.
Step 3 in fixing samsung ice maker) Make sure the refrigerator doors are properly closed.
Step 4) Restart the ice maker by pressing the reset button. After restarting the ice maker, wait 24 hours and see if the ice production started.